Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 25, 2011 6:55:01 GMT -8
That's right folks.... The battery tray on my car is stuffed.... Apart from the Gerson pan halves, are there any replacement panels for the back half pan or is there another option?
|
|
|
|
Post by Carsten Klein on Aug 26, 2011 1:28:29 GMT -8
try to find good used pan ... i got two old pans on sale, one is missung these areas already
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 30, 2011 6:51:21 GMT -8
try to find good used pan ... i got two old pans on sale, one is missung these areas already Bugger.....  |
|
|
|
Post by Jörg Fischer on Aug 30, 2011 7:49:44 GMT -8
any Type 3 pan will do it...
|
|
|
|
Post by bobnotch on Sept 3, 2011 17:38:44 GMT -8
Another option is t-14 Ghia pan sections, IF you don't need the entire pan half. Otherwise, Gerson or used T-3 are your only choices (besides fabbing something).
|
|
|
|
Post by John Kanters on Sept 9, 2011 1:46:46 GMT -8
Best just to make your own, most used stuff is rusted beyond use anyway.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 10, 2011 0:27:40 GMT -8
Best just to make your own, most used stuff is rusted beyond use anyway. As I have found.... Just finished stripping the offending panel down.... Someone has been at it before.... Looks like I can either go with the T14 section or maybe a bug pan and widen it to suit, along with plenty of massaging.... Or make one....  One day Gerson might make a suitable replacement... |
|
|
|
Post by bobnotch on Sept 12, 2011 11:52:12 GMT -8
You might try contacting him, and see IF he's offering battery tray sections yet. When he first started talking about doing full length pans, I asked him IF he was going to do sections, as not everyone needs a full length section. He said he would look into it, since they might have a few "rejects" to make sections with.
|
|
