|
|
Post by Kingsley Davies on Jan 11, 2012 5:28:37 GMT -8
Today I was going over the T34 and noticed the headlight sealed beam was by Westinghouse and not Hella. After further scrutiny I noticed that a rivet was sent through the Hella marking on the head light ring !!!  Attachments:
|
|
|
|
Post by Lee Hedges on Jan 11, 2012 8:09:43 GMT -8
Sealed beam headlight bulbs are often seen by many manufacturers since they are replacements. No problem there.
And the added metal tab on the sealed beam headlight chrome SB13 ring was likely done to facilitate mounting it, as the metal tab on the body had been broken-off.
|
|
|
|
Post by Kingsley Davies on Jan 11, 2012 21:43:38 GMT -8
Sealed beam headlight bulbs are often seen by many manufacturers since they are replacements. No problem there. And the added metal tab on the sealed beam headlight chrome SB13 ring was likely done to facilitate mounting it, as the metal tab on the body had been broken-off. I will check to see if the metal mounting tab is still there. If I repair the rivet hole I may lose the SB13 and Hella print? One of rings is badly damaged, perhaps I should search for a replacement? Attachments:
|
|
|
|
Post by Carsten Klein on Jan 12, 2012 5:29:21 GMT -8
i have a comnplete set sealed beam headlights used for sale !
|
|
