|
Post by Graham Filmer on Apr 8, 2012 5:31:16 GMT -8
Busy stripping and refurbing the dash area. Years ago I got hold of some NOS air boxes so i'm going to replace my frilly ones. Having stripped the old ones out I would value some guidance on the rubber seals before I go half cocked into the job! the larger seal that goes around the box as it goes under the air vents - is there a replacement seal available/or adaptable the inner windscreen seal /open/close flap any replacemnts available or guidance on refurbishment as always all guidance appreciated BW Graham
|
|
|
Post by Lee Hedges on Apr 8, 2012 7:16:22 GMT -8
I recall that Paul Colbert (Nevada USA) did this restoration many years ago and documented the steps. I think it was in an old Razor's Edge newsletter.
|
|
|
Post by Graham Filmer on Apr 8, 2012 7:43:39 GMT -8
|
|
Tom Reay
Pro
Central California USA Rep
Posts: 74
|
Air Box
Apr 8, 2012 15:29:47 GMT -8
Post by Tom Reay on Apr 8, 2012 15:29:47 GMT -8
Okay, here's a silly thing if you want to get real nit-picky - The early (I Guess 62-66) screens were square and the late screens were diagonal.
|
|
|
Air Box
Apr 8, 2012 19:15:11 GMT -8
Post by Lee Hedges on Apr 8, 2012 19:15:11 GMT -8
I received the original article (info & images) from Paul Colbert today. I will be publishing it in the next edition. But I'll share it with you now via email, OK Graham?
|
|
|
Post by Graham Filmer on Apr 9, 2012 1:59:21 GMT -8
all received Lee many thanks
|
|